LankeCMS LOGO
3kW side air coole
Hits:8507
bi-directional DC-
Hits:7878
50kW CHAdeMo fast
Hits:7438
5kW DC-DC converte
Hits:7208
15kW 2U case batte
Hits:6985
40kW brushless spe
Hits:6514
PRODUCTS LIST Home > Product Show
3kW Fan cooled portable battery charger

Product Numbers: CHR-3 P

Product description: 3kW Fan cooled portable battery charger|automatic car battery charger,dc dc battery charger ,electrical cars,Hybrid car charger|PFC charger HS code:H.S 8504409990

INTRODUCTION

Send e-mail to sales@lowcarbon-idea.com for more details

I .Overview

CHR-P series portable battery charger are charging for 48V~300V Li-Ion batteries and Lead-acid batteries, their single power range from 1KW to 3KW, the highest single current can be 100A and reach hundreds kW after parallel operation. They could be widely used in circulation charging of Electric car, Electric taxi, Electric bus, Electric forklift, Golf car, Electric bikes, Electric cruise,Electric boat, Electric yacht and so on with the advantages including light weight, small volume, stability, efficiency and safety. They can Auto Switch between Float Charging and Equalized Charging with the protect function including battery polarity reverse and DC output short circuit and over load.

As an on-board charger, with its own characteristic like waterproof, dustproof, shockproof, and the Electrical performance all meet safety standard. Its uses the micro-computer controlled to control the charge and then auto finish battery charge without manual operation. With its main specialty of more charging zone in accordance with charge and discharge characteristic, it can rapidly full the battery charge while protect the battery charge in a high level in order to avoid the damage by improper charge. Another advantage of this charger is that it could auto identify different seasons and preset the highest charge voltage. This charger has two charge mode: Balance charging mode and pulse charging mode; you can set charging ways by the buttons of the charger and its default state is balance charging mode.

II.Characteristic

● Apply to charge liFePO4 battery, lead acid batter.;

● CPU control battery chargers.

● Can do the real-time communication with BMS which bring CAN main line by CAN communication interface.

● expand and Parallel machine function, support N+M Parallel operation.

● Wide range input, can adapt to different voltage in global world.

● Power factor, PF≥0.99 .

● Complete Protection Function.

●LED working indications and Three color indications for charging status.

● Temperature-compensation circuit.

●The charging curve can be amended in accordance with different batteries.

● Recoverable storage battery.

● Sealed, shockproof, dustproof, waterproof and seft-air cooling.

● 2 years’ guarantee.

www.lowcarbon-idea.com

Dimension

Specifications

Input voltage 100~240VAC
Input frequency 50/60Hz
Power factor 0.99
Battery bank voltage 48V 60V 72V 90V 120V 150V 240V
Max charging voltage 64V 80V 96V 120V 150V 200V 300V
Max charging current 50A 37A 30A 25A 20A 15A 10A
Efficiency 92% 93% 94% 94.5% 94.5% 94.5% 94.5%
Stable voltage accuracy ±0.5%
Stable current accuracy ±0.5%
Ripple factor 0.5%
No load power Complies with the global energy conservation standards
Protection function Input&output (over voltage,low voltage, over current) protection, short circuit & over temperature protection
Charging direction Dual color LED
Communication CAN2.0, 12V enable signal
Cooling Fan cooled
Operating temperature below zero 40 ~+55°C
Standard IEC/CE/GB/RoHS
Weight 3.6kg
Dimension 353X184X70mm
Links: Electway Electric  |     |   Electway Store  |   HK Hybrid  |   Diytrade store  |   Sitemap  |   BBS  |  
  Electway Enterprise Web Site Management System All rights reserved  粤ICP备10104062号-1
  Add:Room C446, NO.22 GuanYu Road,TangDong,TianHe District, GuangZhou,GuangDong,China Tel:+8620-89560230 Fax:+8620-62824921 E-mail: sales@lowcarbon-idea.com