LankeCMS LOGO
3kW side air coole
Hits:9920
bi-directional DC-
Hits:8918
50kW CHAdeMo fast
Hits:8553
5kW DC-DC converte
Hits:8471
15kW 2U case batte
Hits:7956
50kW CHAdeMO fast
Hits:7666
PRODUCTS LIST Home > Product Show
5kW side air cooled on board battery charger

Product Numbers: CHR-5 OB

Product description: 5kW side air cooled on board battery charger|high power factor >0.99|5kW OBC|110/220VAC adjustable

INTRODUCTION

Send e-mail to sales@lowcarbon-idea.com for more details

CHR series high frequency charging power supply are charging for 24V~750V Lithium batteries and Lead-acid batteries, their single power range from 1KW to15KW, the highest single current can be 100A and reach hundreds kW after parallel operation. They could be widely used in circulation charging of Electric car, Electric taxi, Electric bus, Electric forklift, Golf car, Electric bikes, Electric cruise and so on with the advantages including light weight, small volume, stability, efficiency and safety. They can Auto Switch between Float Charging and Equalized Charging with the protect function including battery polarity reverse and DC output short circuit and over load.

As an on-board charger, with its own characteristic like waterproof, dustproof, shockproof, and the Electrical performance all meet safety standard. Its uses the micro-computer controlled to control the charge and then auto finish battery charge without manual operation. With its main specialty of more charging zone in accordance with charge and discharge characteristic, it can rapidly full the battery charge while protect the battery charge in a high level in order to avoid the damage by improper charge. Another advantage of this charger is that it could auto identify different seasons and preset the highest charge voltage. This charger has two charge mode: Balance charging mode and Pulse charging mode; you can set charging ways by the buttons of the charger and its Default state is balance charging mode.

.Characteristic

●Apply to charge lithium battery, lead acid batter.;

● CPU control battery chargers.

● Can do the real-time communication with BMS which bring CAN main line by CAN communication interface.

● expand and Parallel machine function, support N+M Parallel operation.

● Wide range input, can adapt to different voltage in global world.

● Power factor, PF≥0.99 .

● Complete Protection Function.

●LED working indications and Three color indications for charging status.

● Temperature-compensation circuit.

●The charging curve can be amended in accordance with different batteries.

● Recoverable storage battery.

● Sealed, shockproof, dustproof, waterproof and seft-air cooling.

● 2 years’ guarantee.

system diagram

III.datasheet

Item

Battery voltage

Max output voltage

Output max current

EFF%

CHR-5000B -48

48V

60V

83A

≥93%

CHR -5000B -60

60V

75V

66A

≥93.5%

CHR-5000B-72

72V

90V

55A

≥94%

CHR -5000B -96

96V

120V

41A

≥94.5%

CHR -5000B -144

144V

180V

27A

≥95%

CHR -5000B -192

192V

250V

17A

≥95.5%

CHR -5000B -288

288V

360V

14A

≥95.5%

Note:1.above output efficiency is basing: input 220VAC, full load(Resistive load), room temperature 20, after working 5 hours’s testing result.

2.we can customize special voltage and other performance curve.

Input voltage........................100~240VAC (85~169VAC halft power output,170~264VC full power output)
Input frequency........................50/60Hz
Power factor........................≥0.99

Stable voltage accuracy........................±0.5%
Stable current accuracy........................±0.5%
Ripple factor........................≤0.5%
Parallel machine unevenness degree...................≤±3%
communication........................ support CAN
Parallel machine function........................ support N+M parallel machine

Protection........................ Input&output (over voltage,low voltage, over current) protection, short circuit & over temperature protection

Charging display........................LED display
Cooling type.......................seft-cooling

IP class.......................IP65
Working temperature........................-40
+55
Weight..............................≤20Kg
Dimension.............................
.387.5*264*218mm

IV. Features

1.high power density: this series charger using advanced switching technical, small loss and with high efficiency. It consist of PFC power correction circuit and DC/DC converter. It achieves the widely output 100~240VDC. The power factor get 0.99, and efficiency reach 95%.

2.self-air cooling. This series charger using selft cooling type. Advanced PCB design, strict select the components, it leads our products radiation so small and decrease the volume, it make the stability much higher.

3.Advanced charging mode. This charger using 5 stage charging curve. Max voltage is pre-setting. And automatically identify winter and summer mode. Auto and repairing mode as option.

4.Perfect protection function: over heated protection: when the temperature over 75°C, the output decrease to 50%, when the temperature over 85°C, the charger will be shut down. When the temperature get down in normal range, the charger get recovery.

Short circuit protection: when charger happen in short circuit condition, the charger will be shut down, after out of faulty condition, charger will be restart. Reverse connection protection: when the battery are wrongly connect to the charger, the charger will not working and will not break. Low-voltage protection: when AC voltage >85V, <170V, the charger will working on 50% output condition, when AC voltage power <85V or> 265V, the charger will be shut down. When the voltage recover the normal range, the charger will start working. Charger working too long protection: when the charger working time beyond 12 hours, the charger will be shut down.

Outline dimension

Links: Electway Electric  |     |   Electway Store  |   HK Hybrid  |   Diytrade store  |   Sitemap  |   BBS  |  
  Electway Enterprise Web Site Management System All rights reserved  粤ICP备10104062号-1
  Add:Room C446, NO.22 GuanYu Road,TangDong,TianHe District, GuangZhou,GuangDong,China Tel:+8620-89560230 Fax:+8620-89560230 E-mail: electway@yahoo.com